How to Make an AI Music Video from a Song

A finished song gives an AI music video its timing. The production work is deciding what belongs on screen during that time, generating those scenes, and choosing the takes that work together. In LipSync Studio's AI Music Video Generator, you can upload a track, build an editable storyboard, generate shots individually, and compose your selected versions with the original music.

Start with a short, self-contained section of your song if you are learning the workflow. A verse leading into a chorus gives you a clear change to direct and a manageable sequence to review. Once you have an approach you like, use it to plan the full track.

Watch an existing full music video

This finished example is featured on the AI Music Video Generator page. Watch how the shots connect over the soundtrack. Notice where a cut lands against a musical change, how the images carry the visual direction, and how any visible singing follows the vocal.

Existing full-MV example from the AI Music Video Generator.

The walkthrough below uses an original practice concept about a singer waiting at a coastal bus shelter after a storm. Its timing and shot ideas are examples you can adapt to your own music.

Prepare the music and a clear visual starting point

Export the version of the track you intend to publish, including its opening and ending. Listen to that file from start to finish before uploading it. An extra silence at the beginning, an unfinished fade, or an older vocal take will become a production problem once you build the pictures around it.

Use music and reference images you have permission to publish. Keep the final mix and your source project somewhere you can find them again. LipSync Studio's current music-video input accepts tracks up to 10 minutes, but a shorter excerpt is easier to learn on.

Decide how much of the video should show a singer. A narrative can move between faces, places, and objects. A performance video needs more deliberate attention to the singer's framing and mouth movement. For a single portrait performing one song, the picture-singing tutorial covers the simpler image-and-audio workflow. A full MV gives you a sequence of scenes to direct.

Gather a few references that answer concrete visual questions. For the coastal concept, you might use a portrait for the singer, a full-body image for the teal coat and messenger bag, and a photograph of the shelter. Keep the same clothing and hairstyle across the character references. A beautiful image with conflicting details gives the production a less consistent starting point.

Create the project around your track

Open the AI music video generator, sign in, and upload the track under Music source. Wait for the upload and duration check to finish. Name the project so that you can recognize the song and version later.

Under Image references, add the images you want the planner to use. You can supply up to five initial references for characters, clothing, props, settings, or visual style. These guide the project. Review how the resulting storyboard uses them, particularly when the same character appears in several places.

Complete the creative-direction fields for music genre, emotional tone, and visual style. You can explicitly let AI decide when you want a proposal. For a more controlled first project, choose a style you can describe consistently. One coherent treatment is easier to judge than several unrelated visual directions.

Use Settings to choose the aspect ratio, model, and available resolution before planning the images. A landscape release might use 16:9, while a vertical social version might use 9:16. The framing should give the singer and important objects enough room in that shape. Available output settings depend on the selected model. Choose them before starting generation, while the controls are editable.

Give the planner a brief it can act on

Use Additional ideas (optional) to describe the character, setting, mood, and changes you want across the song. Include the moments that need a singing performance. Concrete instructions help you assess the storyboard because you can see which decisions it followed.

Here is a practice brief for the coastal concept.

A singer waits at a small coastal bus shelter after an overnight storm. Keep the same short dark hair, teal raincoat, and brown messenger bag throughout. Begin with quiet, close framing and cool overcast light. During the chorus, open the view toward the harbor as the morning brightens. Include a steady, front-facing singing shot in the shelter. Use the instrumental section for empty seats, rain on the shelter glass, and the water beyond it. End with the singer leaving the shelter in the same coat. Keep the setting grounded and the camera movement gentle.

The details have jobs. Clothing identifies the character, the harbor gives the chorus somewhere to expand, and the quieter images leave space around the performance. You can replace all of those choices while retaining a brief that tells the planner what should stay consistent and what should change.

Choose Generate storyboard after checking the input and the displayed credit cost. Planning and shot generation are separate stages. Review each operation's estimate as you proceed.

Review the storyboard with the music playing

Read the proposed scenes against the uploaded track. Check their start points, duration, prompts, and reference images. Look for the moments when the vocal starts, the arrangement changes, or the song needs a pause in visual activity.

For an imaginary 75-second excerpt, a review outline could look like this.

Song sectionIntended pictureWhat to check
Opening, 0–12 secondsRain on shelter glass and a view of the singer waitingThe setting is clear before the vocal begins
Verse, 12–30 secondsClose and medium views inside the shelterHair, coat, bag, and lighting remain consistent
Chorus, 30–48 secondsA wider harbor view mixed with a singing close-upThe wider image arrives at the musical change
Instrumental, 48–60 secondsEmpty seats, glass, and waterThe sequence gives the performance room to breathe
Final refrain, 60–75 secondsReturn to the singer, then departureThe ending resolves the opening situation

A section can contain several shots. To change a cut, select the shot before it and adjust the Duration slider. This moves its ending boundary and adjusts the adjoining shot's start and duration. The final shot takes its length from the previous boundary. Wait for active tasks to finish if the control is locked.

Inspect the storyboard frames before generating video. If a frame already has the wrong face, coat, or setting, correct the image or reference assignment at that stage. A video prompt that repeats “same person” gives you less control than a suitable reference image paired with a specific description.

For more help mapping musical changes to images, the music-video storyboard guide develops that planning step in more detail.

Generate a few important shots first

Select an individual shot and review its Video prompt and references. For a shot where the singer should mouth the lyrics, turn on Lip sync on that shot's card. This supplies the matching section of your song as reference audio during video generation. Wait until the required reference frames are ready, then choose Generate shot.

For the coastal example, start with the singing close-up and the wide harbor shot. Together, they test the two images on which the chorus depends. Keep the singer's face readable and the action simple. Other shots can concentrate on scenery or movement.

Watch each result with its section of the song. Audio accompanying an individual shot preview is temporary. The final composition uses your original uploaded track, so judge the mouth timing and visual pacing against that recording.

Check the first and last frames as carefully as the middle. A face can look convincing in a still and change when the character turns. A smooth camera move can still make a poor cut if it ends in a completely different position.

Once those important shots establish a workable direction, continue individually or use Generate all shots. If some scenes are already generated, the bulk action becomes Generate remaining shots. Review the credit total and reference readiness before confirming the operation.

Revise a scene and choose its version

Treat each failed or unsuitable shot as a specific editing problem. Compare it with the intended reference and ask which part failed.

Problem you seeRevision to try
The coat or face changesCheck the assigned character images and simplify conflicting appearance instructions
A hand or bag distracts from the performanceReduce the action or choose a composition that keeps the prop simple
The chorus looks as quiet as the verseGive the chorus a wider view, brighter light, or a more purposeful camera move
The singer's mouth is unclearReview the face reference, framing, and the shot's lip-sync options
A cut feels lateCheck the storyboard timing against the musical change before generating another take

To change the picture or action, use the shot's new-version controls, revise its prompt or references, and choose Generate new version.

If a completed take looks right but its mouth timing needs attention, select it and choose Fix lip sync. The Lip sync model choices include Lip Sync Video (Occlusion Handling), Lip Sync Video (Scene and Speaker Identification), and Enhanced. Check the options for the one you select. Occlusion Handling offers an optional mask to select the speaker, while Scene and Speaker Identification includes Clean up vocals. A speaker mask identifies who follows the audio, and you still need to inspect any obstructed mouth in the result.

Review the displayed credit total and submit the repair. This uses the selected video and its matching shot audio to create a new version, with its own generation cost. If the panel reports missing reference audio, follow its instruction to generate a new video version first.

Compare the completed takes using Select a version. Choose the one that connects with its neighbors, including the repaired version if you prefer its mouth movement.

Revisit the adjoining cuts after changing a shot. A new camera direction can make the next shot feel disconnected. Keep enough continuity in framing, lighting, and character appearance for the sequence to remain readable.

Use Regenerate storyboard when you intend to replan the project. Its confirmation warns that regenerating permanently removes the current storyboard, images, prompts, shot edits and versions, and final-output history. For a local revision, work with the individual shot's version controls.

Compose and inspect the final video

When every shot has a completed version selected, choose Compose final video. It saves pending timeline edits, shot edits, and version selections before assembling the chosen shots with the original track. Open Final video when the job finishes and watch the sequence all the way through.

If a save error stops the composition from starting, check that your edits and selected versions are saved, then submit Compose final video again.

Do one pass for the music and cuts, then another for faces, clothing, props, and scene continuity. Finally, check the opening and ending on the device or screen shape you are targeting. Small details that are visible in a large preview may disappear in a vertical feed.

If you replace a selected shot after composing, compose again to include that change. In Final video, select the completed version with your latest shot selections. Use your browser's video controls to download it, or the video's context menu to choose Save Video As, where available. Open the downloaded copy and check its picture and audio before sharing it.

Keep the project brief and useful references with the track so that the next video starts from decisions you can reuse.

Open the AI Music Video Generator to begin with your own track and references. Generate the few shots that carry the song's main idea first, then build the rest of the sequence around the takes you choose.